Wireless Home Automation System
Products from producer
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Description
Operation type: Receiver with 4 ports
This unit can fit inside any existing electrical switch board cabinet
Loads of upto 5 Amps can be switched ON/OFF from anywhere in a house
Existing manual switches can co-exist.
Loads can be like, fans, tubelights, bulbs, lamps etc.
Transmitter type: Any / all of the following 8 Key Remote Controller FBXCON-USB FBXCON-GP10 FBXCON-RS232 FBXCON-RS485
Technical Operating Frequency: 865-868MHz Operating Voltage: 220-240VAC/50Hz
Switching: TRIAC Based System Operating Current: Idle Condition ~1uA 1 port ON: 1.3mA; 2 ports ON: 2.2mA 3 ports ON: 2.8mA 4 ports ON: 3.5mA 5 ports ON: 4.0mA RF Receiving Sensitivity: -104 dBm
Mechanical Enclosure Size: Antenna Length: ~75mm - 85mm Connections: 2 pin connector (viz. Phase / Hot Line and Neutral) 4 pin connector (for each switching load, in parallel) Antenna: Soft wire (rubber coated)
Firmware Channels: 200 independent channels Module Addressing: 16bit Addressing
Range of Communication: 100-300meters (Depending on site conditions)
Transmitter type: Any / all of the following 8 Key Remote Controller FBXCON-USB FBXCON-GP10 FBXCON-RS232 FBXCON-RS485
Technical Operating Frequency: 865-868MHz Operating Voltage: 220-240VAC/50Hz
Switching: TRIAC Based System Operating Current: Idle Condition ~1uA 1 port ON: 1.3mA; 2 ports ON: 2.2mA 3 ports ON: 2.8mA 4 ports ON: 3.5mA 5 ports ON: 4.0mA RF Receiving Sensitivity: -104 dBm
Mechanical Enclosure Size: Antenna Length: ~75mm - 85mm Connections: 2 pin connector (viz. Phase / Hot Line and Neutral) 4 pin connector (for each switching load, in parallel) Antenna: Soft wire (rubber coated)
Firmware Channels: 200 independent channels Module Addressing: 16bit Addressing
Range of Communication: 100-300meters (Depending on site conditions)
Contact the seller
Wireless Home Automation System
We recommend to see